ALAKHSAEI INVESTMENT
info@alakhsaei.com+249900307064
Home / Products

ALAKHSAEI Activated Carbon — Gold Grade

Back to product catalog
ALAKHSAEI Activated Carbon — Gold Grade
ALAKHSAEI

ALAKHSAEI Activated Carbon — Gold Grade

Specified iodine value
≥1050 mg/g
Specified hardness
≥98 %
Specified maximum ash content
≤3 %

Coconut-shell granular activated carbon for gold recovery circuits, supplied in 6×12 mesh and 25 kg bags.

ALAKHSAEI Gold Grade is designed to adsorb dissolved gold in industrial recovery circuits. Its porous structure provides internal adsorption surface, while suitable hardness and particle sizing help manage handling and carbon losses. The values below are the agreed product supply requirements; batch results are confirmed against its analysis document and supply terms. Iodine value indicates adsorption activity, but alone does not establish gold-loading capacity or recovery percentage. Carbon does not produce gold; it helps capture dissolved gold from the process solution.

ALAKHSAEI GOLD GRADE

Watch ALAKHSAEI carbon

Illustrative product advertising. Gold quantities and bar weight in the video are symbolic; actual recovery depends on ore, circuit design and operating conditions.

ALAKHSAEI

ALAKHSAEI carbon demonstration

Watch the demonstration clip supplied by ALAKHSAEI. The video documents the scene shown; batch specifications are assessed through testing and a Certificate of Analysis, rather than visual observation alone.

Open demonstration video

Technical specifications

PropertyValueUnit
BrandALAKHSAEI
GradeGranular activated carbon for gold recovery
Raw materialCoconut shell
Specified iodine value≥1050mg/g
Specified hardness≥98%
Specified maximum ash content≤3%
Specified maximum moisture≤5%
Particle size6 × 12mesh
Net bag weight25kg

Practical benefits

• Porous structure for dissolved-gold adsorption in suitable process circuits. • Coconut-shell feedstock and a high specified hardness to support resistance to handling breakage. • Defined particle sizing helps select suitable retention screens and limit carbon escape. • Loaded carbon may be eluted and regenerated in an appropriate industrial circuit, following activity and condition assessment. • Bag security code can be checked against the ALAKHSAEI registry.

Applications

CIP — carbon contacts leached pulp to adsorb dissolved gold, then is separated using suitable retention screens. CIL — adsorption occurs alongside leaching within a purpose-designed circuit. CIC — carbon columns recover gold from suitable process solutions. A process engineer determines suitability for the ore and circuit; one universal dosage or contact time does not apply to every site.

Use and preparation

1. On receipt, check bag code, batch, weight and packaging condition; retain a representative comparison sample. 2. Match particle sizing with circuit retention screens and inspect screen condition before charging carbon. 3. Wet, rinse or remove fines where required by supplier and site procedures, containing rinse water and fines. 4. Introduce carbon progressively under the approved operating plan and monitor activity, gold loading and residual dissolved gold. 5. Transfer loaded carbon for elution, regeneration and condition checks before reuse. Chemical and thermal stages require trained personnel and a properly equipped facility.

Getting more value with less loss

• Limit bag drops, rough dragging and unnecessary friction during transport. • Maintain retention screens and address holes, wear and blockage early. • Adjust pumping and agitation for effective contact without excessive granule breakage. • Monitor fines and carbon leaving with tailings; retain them for gold-content assessment rather than discarding directly. • Protect carbon from oils and contaminants that may occupy adsorption sites. • Track batch carbon inventory, consumption and gold loading; base decisions on analysis, not carbon colour alone.

Storage and handling

Store sealed bags dry on pallets, away from direct sunlight, moisture, oils and contaminating chemicals. Avoid excessive compression and punctures during stacking and handling. Limit airborne dust when opening bags and use appropriate protection under the site risk assessment and safety data sheet. Collect spills and spent carbon under facility procedures.

Packaging

25 kg net branded bag with a security code for registry checking. A 28-tonne shipment equals 1,120 bags; loading plan and final quantity are confirmed when ordering.

Check your bag code

Check the bag security code against the ALAKHSAEI registry.

Verify bag

Is this right for your project?

Tell us your requirements and destination to discuss specifications and sourcing options.

Request a quote for this product

Related products