Wet Pan Mill Spare Parts
- Supply scope
- Drive assemblies and shafts, gears, grinding rings and wear parts, reduction gearboxes
- Drive — function and materials
- Transfers drive to the vertical shaft and grinding-wheel arms; suitable shaft/gear steel and steel supports selected for the load
- Shafts — dimensions
- Diameter, overall length, shoulders, bearing seats and seal locations
Drive assemblies, shafts, gears, grinding rings and gearboxes. Wholesale, full-container supply matched to the mill model and technical drawing.
ALAKHSAEI wet pan mill spare parts, based on the attached technical offer. The scope covers the illustrated spare-part groups, not a complete mill. Specifications are customizable technical options, not dimensions measured from the image. Final compatibility, materials, hardness, torque and acceptance limits depend on the model and approved drawings or original sample. Images are enhanced for presentation. No service life, throughput or sets per container are inferred from the image.
Technical specifications
| Property | Value | Unit |
|---|---|---|
| Supply scope | Drive assemblies and shafts, gears, grinding rings and wear parts, reduction gearboxes | |
| Drive — function and materials | Transfers drive to the vertical shaft and grinding-wheel arms; suitable shaft/gear steel and steel supports selected for the load | |
| Shafts — dimensions | Diameter, overall length, shoulders, bearing seats and seal locations | |
| Shafts — connections | Keyways or splines, flanges, holes and coupling diameters | |
| Drive — operating data | Input/output speed, torque, rotation direction and shaft loads | |
| Assemblies — inspection and contents | Precision machining and straightness/dimensional/surface checks; match bearing and seal numbers; confirm bushings, keys and supports in the supply list | |
| Gears — forms and materials | Rough ring forms and machined bevel gears; suitable carbon or alloy gear steel selected to drawings and loads | |
| Gears — tooth geometry | Tooth count, module, pressure angle, shaft angle and face width; spiral hand/angle and tooth-generation system | |
| Gears — mounting and compatibility | Bore, keyway, flanges, mounting distance and mating-gear compatibility; check backlash and contact pattern after assembly | |
| Gears — treatment and inspection | Heat treatment for the alloy/load; confirm hardness and case depth where applicable; material, dimensional and surface-defect checks | |
| Grinding rings — part identification | Confirm wheel ring versus grinding base using drawings or an original sample | |
| Grinding rings — material options | Cast steel, cast iron or manganese steel selected for the application | |
| Grinding rings — dimensions and mounting | Outside/inside diameters, axial width and thickness; profile, finish, roundness, interference fit or holes and actual measured weight | |
| Wear parts — quality and replacement | Chemical, dimensional, hardness and casting-defect checks; minimum thickness/wear limits per equipment manufacturer and wheel/base clearance review | |
| Gearbox — construction and rating | Model-specific gears, shafts, bearings and seals; rating based on reducer nameplate, motor, service factor and actual loads | |
| Gearbox — ratio and torque | Ratio from nameplate, tooth counts or input/output speeds; output torque, rotation and axial/radial loads within manufacturer limits | |
| Gearbox — mounting and lubrication | Shaft dimensions, keys, holes, shaft height and mounting position; oil type, viscosity, amount and level per model | |
| Gearbox — acceptance and delivery | Test speed, noise, vibration, temperature and leaks; confirm included parts, shipping-oil condition and plugged ports | |
| Reference example only — model 1100 | 1100 mm wheel diameter, 180 mm width, 5.5 kW motor; does not establish compatibility of the illustrated parts | |
| Reference example only — model 1200 | 1200 mm wheel diameter, 200 mm width, 7.5 kW motor; does not establish compatibility of the illustrated parts | |
| Order confirmation data | Manufacturer, model, serial number, nameplates, drawings or original sample, connections, tooth/bearing data, motor power/speed, ore, operating hours, loads, quantity and destination | |
| Compatibility and quality approval | Approve drawings, parts list, material grades and inspection plan before manufacture, then review material/treatment/dimension reports; designation 450 alone does not define ratio or torque |
Applications
Maintenance and replacement of wet pan mill transmissions and wear components for ore processing, subject to technical compatibility approval.
Packaging
Wholesale and full-container shipments only. Number parts and protect teeth, machined surfaces and shafts against corrosion and impact. Secure sea-freight packing with a dimensional/weight packing list. Container payload and set count require an approved loading plan.
Specifications & documents
Is this right for your project?
Tell us your requirements and destination to discuss specifications and sourcing options.