High-purity Metallic Mercury — 99.999% (5N) Specification
- Required purity by mass
- ≥99.999 (5N) %
- Product
- High-purity metallic mercury
- Required total impurities
- ≤10 mg/kg (ppm)
Metallic mercury (Hg) with a specified purity requirement of ≥99.999% by mass and total impurity requirement of ≤10 ppm, as stated in the attached technical sheet.
ALAKHSAEI presents high-purity metallic mercury against technical requirements to be verified by a batch Certificate of Analysis. The stated purity is a specification requirement, not a test result for the pictured containers. The COA should identify the purity basis, test method and detection limits. The image is a product presentation and does not establish origin or certification. Batch details, packaging, availability and supply documentation are confirmed when quoting.
Technical specifications
| Property | Value | Unit |
|---|---|---|
| Product | High-purity metallic mercury | |
| Required purity by mass | ≥99.999 (5N) | % |
| Required total impurities | ≤10 | mg/kg (ppm) |
| Chemical symbol | Hg | |
| CAS number | 7439-97-6 | |
| Required appearance | Silvery liquid without visible impurities | |
| Required quality documentation | Batch COA + SDS | |
| Physical state at 20°C | Liquid | |
| Reference density | 13.5336 | g/cm³ |
| Reference melting point | −38.829 | °C |
| Reference boiling point | 356.619 | °C |
| Reference transport identification | UN 2809 | 8 (6.1) | PG III |
Use and preparation
For trained personnel in equipped facilities only. Review the batch SDS and facility procedures before handling. Use closed containment or effective local exhaust; avoid contact, heating and vapour inhalation. Select protective equipment through an exposure assessment; ordinary masks are inadequate. Do not open containers in offices or residential areas. For a spill, isolate the area and call specialists; never sweep, vacuum or discharge mercury to drains. After exposure, move to fresh air and seek immediate medical attention. Summary based on ILO/WHO ICSC 0056 and CDC/NIOSH; it does not replace the SDS.
Storage and handling
Keep compatible containers tightly closed and upright within secondary containment in a dedicated chemical store, away from heat, food, drains and incompatible substances. Follow the batch SDS for storage and transport requirements. Transfer waste to an authorised handler.
Packaging
Container type, net weight and labelling are defined in the supply quotation and batch documentation.
Specifications & documents
Is this right for your project?
Tell us your requirements and destination to discuss specifications and sourcing options.